Nissan Race Shop Categories

Synergy Turbo 340 LPH/E85 Fuel Pump

The Synergy 340 Fuel Pump is a high-output, in-tank, electric fuel pump that fits most popular EFI applications. The Synergy 340 is a compact, lightweight pump that bolts into many existing hanger assemblies. What sets our 340 Pump apart is its superior flow throughout a wide pressure range. This pump is ideal for applications requiring more flow while retaining the factory lines and mounting provisions available in the Original Equipment (O.E.) configuration. The 340 is also perfect for use as a universal replacement for applications that require more flow to support forced air power adders such as turbo and supercharged applications.

• Fits most vehicles where popular aftermarket pumps are applicable.
• Offset Inlet, In-line with outlet
• Includes universal filter sock – may not fit in some applications (see OEM filter
replacement recommendations)
• Designed for in-tank use only
• Can be used in carbureted or EFI applications
• Turbine pump mechanism increases durability and can be used in pulse modulated applications.

Includes:
• Pump
• Universal Drop Parts Kit (Filter, Wiring Pigtail, Rubber Hose, (2) Clamps, Rubber Grommet)

JDM Nissan Emblem Front -- G35

This is a front grille emblem for the Nissan 350GT, the Japanese version of the Infiniti G35. It is one of four exterior emblems found on the Skyline 350GT and will complete your re-badging conversion.

Hawk HP+ Autocross FRONT brake pad set, ABS S13

Hawk HP+ Brake Pads

Perfect for Auto X or other aggressive driving.

Motul 300V Power Racing 5w30 Motor Oil

For racing cars with atmospheric or turbocharged engines, race or qualifying engines
For cars requiring maximum power output and fastest rev raisings
100 percent synthetic engine oil
Double Ester technology
Maximum power output and decreases operating temperature

Motul Shine and Go

Motul Shine and Go is a Clear coat spray that restores the beautiful luster of painted and plastic surfaces. Lays down a dry film of protection that prevents dust and dirt from sticking on sprayed surfaces. Minimizes cleaning effort and leaves a beautiful shine.

ARK DESIGN Boost Controller

The ARK Design’s Advanced Boost Controller (ABC) is a simple to use boost controller that accurately dials in boost pressure with its user-friendly controls. Within the ABC’s compact design are two independent boost settings, over-boost warning, safety switch, peak-hold and a one of a kind, patented “see-saw” control switch. The bright LED display is available in Blue or Red, and can display boost pressure in PSI or kPA. A user programmable Multi-Color LED indicator light is also integrated for notification of over-boosting.

Compact Design
Slim compact display/control unit (W105 x D20 x H18mm) provides easy installation and placement inside any vehicle. The pressure sensor is built into to the power supply, reducing the amount of components needed in the engine bay.

Two Boost Settings
Two independent boost settings are available for users to set different levels to suit various driving conditions.

Display Screen
Large and Bright LED displays boost pressure in PSI or kPA. Available in RED or BLUE display.

Sew-Saw Switch Button
Patented See-Saw switch and Roller button allow ease of adjustment and navigation during setup.

Warning Boost Setting
Users can select an over-boost warning level where the Multi-Color LED Indicator will flash when reached. The Mulit-Color LED Indicator has eight(?) different colors to choose from.

Safety Switch
For additional safety, the ABC also monitors the rate at which boost pressure increases. If boost begins to rise at an abnormal rate, the safety switch will drop the pressure to the base level of the wastegate.

Peak Hold Display
The peak boost level is memorized automatically. With a simple touch users can recall the highest boost pressure reached.

ARK DESIGN Turbo Timer

The ARK Design Rev-Shift Timer is an innovative product that incorporates a Turbo Timer, Shift Light, A/F Ratio and Battery Voltage meter in a stylish compact design. Its multi-color LED indicator shows color changing A/F readings and well as shift point. Plus an industry’s first See-Saw and roller button control adds uniqueness to the Rev-Shift Timer. Available in RED or BLUE LED display.

Timer Function
Auto Mode calculates (by driving style) how long a turbocharged vehicle’s engine should run after the ignition has been shut off. Manual Mode – allows drivers to set desired the idling time.

Rev-Shift Function
RPM can be captured through either the alternator pulse or directly from the ECU. The shift light can be set to turn on and off at any RPM. The LED indicator will flash in bright white when the user preset shift point is reached.

A/F Ratio Display
A/F ratio can be displayed numerically on the LED display and in color ranges by the LED indicator. A/F ratio is calculated from the factory O2 sensor. Because most OEM O2 sensors are designed for emissions, the Rev-shift Timer’s readings may vary compared to a wide-band A/F meter. (A/F ratio readings will only work with the Zirconia type O2 sensors).

A/F Ratio Color Indicators
Multi-color LED Indicator for A/F and RPM shift light. Colors will change according to the A/F level & flash in white when shift point setting is reached.

Battery Voltage Display
Battery Voltage can be displayed on the LED Display along with charge status.

NRG Short Hub

NRG Innovation has developed another complement to the quick release steering kits. NRG Short Hubs were designed specially so that an aftermarket steering wheel installed with the quick release kit still mounts in the same location, not too close to the driver. Made from the highest quality aluminum. NRG Short Hubs are designed utilizing one piece solid construction for the maxim in durability and usability.

DC Sports Single Canister Exhaust Systems 350z

Exhaust System, Single Canister, Cat-back, Stainless, Polished, X-pipe, Rear Exit, Nissan, 3.5L, Manual, Kit

Energy Suspension Front Control Arm Bushing -- Black

Energy Suspension Sub Frame Bushing Set -- Red

Aluminum body mounts are too harsh for street use and tend to break, causing damage to other parts. Original rubber mounts are so soft that they crack, distort, crush, and often fall off. Energy Suspension's specially formulated polyurethane body mount sets combine the best qualities of both--they're soft enough for a smooth ride, and yet rugged enough for the most demanding road or track. Most have a steel ring molded into the end for added durability.

Energy Suspension Steering Rack Bushings -- Red

· Increase steering feedback
· Replace old rubber bushings
· Recommended to do w/ tie rod

Anzo Nissan Titan Headlight Chrome Housing

Anzo USA is the answer for all of your performance lighting needs. With over 29 years of manufacturing experience, we surpass our competition in quality, innovative styling and product offerings. We are dedicated to providing great service and superior customer support through an experienced sales team and a knowledgeable technical staff.

Anzo USA offers the best quality performance lighting products at the lowest cost. All ANZO USA products are S.A.E. (Society Automotive Engineers) and D.O.T. (Department of Transportation) compliant to FMVSS no. 108 (Federal Motor Vehicle Safety Standards); and manufactured in a state-of-the-art ISO 9002 and QS 9000 quality certified factory.

In order to ensure perfection, we rigorously test every ANZO USA lighting product in a Thermo-Hygrometer (temperature and humidity chamber) and Rain-Resistant Tester. As well as thoroughly exposing all of our products to intense photometric testing to guarantee strict compliance with local, state, federal and international standards.

All of our lighting products are designed using CAD/CAM computerized equipment and these modern designs are then tested using a 3-dimensional testing machine to insure precision and accuracy in the research, development and design of our molds.

S14 JDM Kouki Fog Light -- RH

Nissan JDM S14 Kouki Fog Lamps. Applied on the JDM Kouki front bumper only. Genuine Nissan OEM parts.

Fitment: 1997-1998 240SX for Kouki conversion.

Driver side: 26155-80F25

OEM Nissan KA24DE Crankshaft bushing

Crankshaft bushing for KA24DE

Synergy Turbo SR20DET S13, S14, S15 SR20DET Turbocharger

Synergy SR20 turbo comes with a T25-flanged MHI turbocharger with 20G compressor wheel and housing and 8cm turbine housing. A direct bolt-on upgraded turbocharger solution for the SR20DET (Nissan S13/S14/S15) platform. Capable up to 430HP (with the correct supporting modifications). Get more boost for your buck, and the protection to match with our standard 1yr or 15k mileage warranty.

Car Model	Turbo Model	Part Number
S13/S14 SR20DET	TD06H-20G-8 (12B)	ST06H20G8SR20
	Max HP	Flange
	430	T25
	Compressor Diameter	CFM
	52.5/68mm	640
	lbs/min	Turbine AR
	46	57
	Nozzle Area	Wheel Diameter
	8cm	58.8/67.14mm
	Wastegate	Bearing
	1 Bar	Journal
	Cooling	MSRP
	Oil and water	$1,155.00

NISMO 1/43 SCALE XANAVI NISMO Z

NISMO 1/43 SCALE DIECAST XANAVI NISMO Z. One of 9000pcs. Limited edition!

HASEMI MOTORSPORT 1/43 SCALE G\‘ZOX SSR HASEMI Z

1/43 SCALE DIECAST MODEL HASEMI MOTORSPORT G'ZOX SSR HASEMI Z.

EBBRO 1/43 SCALE CALSONIC IMPUL Z

EBBRO 1/43 scale Calsonic Impul z diecast model car. One of 4992 pcs! Limited edition!

Cometic 3 Bolt Thermostat Housing Gasket

Cometic 90-94 Nissan SR20DE/DET DOHC 16V 2.0L Thermostat Housing Gasket

Cometic Bottom End Gasket Kit (Engine SR20DE/DET 97-02 DOHC)

Cometic Street Pro Nissan 1991-01 SR20DE FWD ONLY Bottom End Kit

Compatible with Engine SR20DE/DET 97-02 DOHC 16V 2.0L (FWD) no additional oil holes

Cometic Top End Gasket Kit w/87mm Head Gasket

Cometic Street Pro Nissan 1997-01 SR20DE FWD ONLY 87mm Bore Top End Kit

JDM Front Bumper Clear Reflectors 03-05 350z

Pair of 2. JDM Clear reflectors for the 03-05 350z front bumper. These parts are imported directly from Japan.

Whiteline Front Sway Bar Link Kit GT-R

Application Notes

Part Notes
Low compliance steel ball nylon cage design

Key Feature and Benefit
Performance sway bar links utilising a heavy duty steel ball joint ends that adjust & rotate to any angular combination. Eliminate sway bar preload via the light weight aluminium bodies provide 25mm centre to centre length adjustment.

Features and Benefits
Whiteline Sway Bar Accessories
OE and aftermarket swaybar effectiveness can be hindered by worn or inadequate mounts and links. Whiteline swaybar accessories are heavy duty and long lasting to ensure the maximum output of the swaybar for improved grip and better handling.

Whiteline 33mm Front Sway Bar -- R35 GTR

Part Notes
Replacement type
3 point adjustable

Key Feature and Benefit
This Whiteline 33mm 3 point adjustable swaybar = more grip = better handling = outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle. This Whiteline adjustable sway bar allows its rate to be altered by increasing or reducing the length of the lever arms. This permits the roll stiffness to be tuned for different situations without replacing the entire bar. The stiffer the bar, the more force required to move the left and right wheels relative to each other. This increases the amount of force required to make the body roll

Features and Benefits
Whiteline Sway Bars
The fitting of bigger Whiteline wwaybars is still the best dollar for dollar handling improvement you can make. Cornering loads are spread more evenly across the tyres delivering more grip and frankly, that’s what it’s all about. You also get improved tyre wear as your tyres stay flatter and more upright. Comfort improves because your car sits flatter through bends meaning less movement inside the vehicle. Whiteline swaybars are manufactured using the finest grade spring steel. They are powder coated and supplied with high performance polyurethane mounting bushes in a DIY kit form, ready to simply bolt on.

Energy Suspension Shifter Bushings 91-94

Polyurethane Shifter Stabilizer Bushings

Replaces distorted and worn-out original rubber bushings–better than new!
Maintains consistent shifts - even in harsh racing environments.
Allows the shifter to interact with the transmission in proper alignment - resulting in a crisper, more precise shift every time.
Made of Energy's HYPER-FLEX™ performance polyurethane to add performance and durability.

For Manual Transmissions only.

Energy Suspension Front Control Arm Bushings 91-99 Sentra, NX160

If your car’s handling seems a bit on the sloppy side lately, replace your mushy rubber bushings with Energy Suspension’s Control Arm Bushing Sets. Because polyurethane is unaffected by oil, smog, road salt, or most chemicals, it doesn’t soften, compress, or distort like rubber does. So when you turn the steering wheel, take a high speed corner, or hit some potholes, these bushings will give you the ride of your life.

Cross Drilled Skyline R32 GTR / 300ZX Z32 Brake Rotor Front RH

Nissan Motorsports Cross Drilled Rear Brake Rotor (LH and RH sold individually)

Fits Skyline GTR R32, 300ZX Z32

JDM Nissan S15 Silvia SR20DET Ignition Coil

JDM Nissan Ignition Coil for S15 Silvia SR20DET (standard SR20DET coils will not work on S15 motors)

JDM Nissan Versa 4dr Sedan Window Deflectors

JDM Nissan side window deflectors set

Fits Versa (Tiida) 4dr

Nismo Racing Brake Pads Set for NX2000 AD22V Calipers

Racing Brake pads by Nissan Motorsports for NX2000 / Sentra using AD22V calipers

JDM Nissan RB20DET Oil Pump Assembly

Factory JDM Nissan RB20DET GT-R Oil Pump

JDM Nissan Head Gasket for SR20DET FWD GTI-R

JDM Nissan head gasket for SR20DET FWD GTI-R motor

NISMO Heaby Duty Main Bearing Cap Bolts SR20 engines

Nismo heavy duty main cap bolts for all SR20 engines.

22% stronger than OE parts, torque to 62-84 lbs/ft

Nismo N1 Water Pump for SR20DE Motor

Nismo N1 Sentra Water Pump

From JDM SR16VE N1 Engine

Fits all USA SR20DE motors

Nismo Lug Nut Set 50mm Length, Black w/logo 12x1.25

Nismo Black Racing Lug Nut Set

QTY 20 per set 12x1.25
(Nissan / Infiniti )

50mm length (LONG version)

Nismo Carbon Fiber B-Pillar Set Nissan 350Z

Authentic JDM NISMO Carbon Fiber B Pillar set.

Fits Nissan 350Z.

High quality UV protective clearcoat prevents fading and yellowing in the sun. These will stand the test of time and look great, with that REAL NISMO logo!

Nismo GT2 Brake Duct Kit w/ NACA Ducts 350Z

Nismo G2 Brake Duct Kit

Includes install hardware and hoses etc. Cutting of lower engine cover is required to fit the included NACA airducts.

For the ultimate in brake system cooling!

These are imported from Japan. Delivery time can be as long as 6-8 weeks.

Drilled JDM Nissan 300ZX / R32 GTR Front Rotor LH

Skyline R32 GTR and GT brake components available for the Z32 and 240SX. GTR rotors are cross-drilled, 295mm x 32mm. If used on a Z32/S-Chassis, it is required to use a Skyline GTR caliper and the removal of the backing plate on the Z32/S-Chassis units.

LH side rotor Front NEW IN BOX

Hawk HPS Front Pads 370Z / G37 Sport

HPS
Performance Street Compound.

High Performance Street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance�s HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology.

The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you�ll have a highly durable brake pad with less brake dust.

Fits: 370Z / G37 Sport w/ OEM Akebono Big Brake Kit

Nismo Rear Tower Bar 240SX

Nismo Rear strut tower bar 240SX / Silvia S14

Password:JDM Billet Aluminum Tow Hook (Front & Rear)

Password:JDM and BDL Industries have teamed up to create a limited edition run of aluminum tow hooks. Each tow hook has been precision C.A.D. designed and CNC machined from aircraft quality 6061 T6 billet aluminum. The accessibility of the tow hooks are for quick safe vehicle recovery in case of an emergency. Each tow hook set comes complete with all necessary mounting hardware. Available in anodized black, blue, gold, gunmetal, purple, red, or silver finish.

Price includes the front and rear tow hook set.

Universal fitment

Black in stock

Nismo Thermostat VQ35 350Z, G35, FX35, M35, G35

NISMO thermostats open at much lower temperatures versus stock. This thermostat Opens at 62 Degrees Celsius, (143.6 Degrees Fahrenheit)

SPL Rear Titanium Traction Links Z33

Our rear traction links eliminate the mushy rubber bushings on the stock links to reduce toe change in the rear suspension under hard acceleration/braking and when going over bumps. This provides more stability and predictability to the rear suspension for high performance street cars, and for racing or drifting. Our traction links are also length adjustable to allow the rear suspension bumpsteer characteristics to be adjusted.

Our traction links feature 1.25" 4130 chromoly tubing that is slipped over a CNC machined threaded sleeve then TIG welded, making our links extremely strong yet lightweight. High quality motorsports bearing provides lower friction and smoother articulation.

Eibach Pro Kit Lowering Springs 370Z

Features

The Eibach Springs Pro Kit is custom-made for your specific year, make and model vehicle
Unique progressive spring design lowers your ride 1" to 1½"
The Eibach Pro Kit drops your center of gravity, which reduces acceleration squat, trims body roll in corners, ends excessive nose-dive when braking, and improves overall handling
Lowers the wheel well over the tire, eliminating the extra space for hot performance looks
4 springs included in the Eibach Pro Kit
Installing Eibach Springs takes 3-5 hours and may require a spring compressor
Compatible with your stock shocks, though performance of the Pro Kit is accentuated by Eibach Pro Dampers
Part of the famed Eibach Pro System Plus performance suspension, along with Pro Dampers, the Eibach Anti-Roll Kit and more
Your Eibach Pro Kit carries a 1,000,000-mile warranty

Description

Eibach's legendary spring system, the Pro Kit, dramatically improves the performance, handling and appearance of your vehicle. The secret is Eibach's proprietary progressive spring design, lowering your vehicle 1" to 1½" without compromising safety or ride quality. And, the advanced cornering takes your passion for driving to a whole new level.

Dropping your vehicle with the Eibach Pro Kit makes a world of difference for your vehicle. These Eibach Springs lower your vehicle's center of gravity, reducing acceleration squat, cornering body roll and braking nose dive. Plus, the slight drop eliminates fender-well clearance for first-place racing looks.

Installing the Eibach Pro Kit takes more than a few hours to complete safely and correctly. You'll need several tools, most likely including a spring compressor. The added performance and looks are well worth the project time. Best yet, your Eibach Pro Kit carries a 1,000,000-mile warranty.

Notes

Initial lowering length may be less than 1". Your vehicle will settle shortly into the 1" to 1½" lowered range. Exact length depends on the weight of vehicle components.

Nismo Shift Knob Carbon 10X1.25 (Manual Trans Only)

Universal Screw On Shift Knob

Color: Polished / Carbon

Fitment: ANY vehicle using 10x1.25 Threaded Shifter (Most Infiniti, Nissan, Mitsubishi, Mazda etc.)

(Please make sure of your vehicle's fitment before ordering).

Cosworth High Performance Head Gasket - SR20 90mm Bore

Cosworth High Performance Head Gaskets are engineered to seal in power under the most
demanding conditions. Constructed from stainless steel with a folded stopper layer, each application features superior sealing compared to conventional multi layer steel gaskets. Additionally, Cosworth High Performance Head Gaskets are manufactured from pre-coated die cut stainless steel resulting in uniform coating distribution and consistent shape.

Engineered specifically for sleeved large bore applications
Configured for all Nissan SR20 applications
Individual die cut layers of stainless steel with superior consistency compared to laser cut gaskets
Pre-coated stainless steel with a 0.25 micron layer of nitrile rubber ensures consistent distribution of coating with no high or low areas
Manufacturing dimensional tolerance of +/- 0.001
Die cut manufacturing process ensures smooth edges, unlike laser cut gaskets
Cosworth gaskets feature a folded stopper layer for additional torque around eachcylinder. The width of sealing area is specific for each application thereby providing ultimate sealing properties
Available in a range of thicknesses for specific applications
Bore size: 90mm
Thickness 1.1mm, 1.5mm

Whiteline Rear Sway Bar 24mm Adjustable - Nissan 370Z/G37

A Whiteline sway bar, anti-roll or stabilizer bar provides a link between the left and right hand side of your suspension during cornering and is designed to minimise vehicle body roll, with cornering loads spread more evenly across the tyres resulting in more grip. Better grip, improves handling and ultimately leads to a higher performing vehicle. Whiteline adjustable sway bars allow their stiffness to be altered by increasing or reducing the length of the lever arms. This permits the roll stiffness to be tuned for different situations without replacing the entire bar. The stiffer the bar, the more force required to move the left and right wheels relative to each other. This increases the amount of force required to make the vehicle body roll. Whiteline adjustable sway bars offer from 2, up to 4 points of adjustment, allowing in some cases 10 distinct stiffness settings for precise handling bias (towards oversteer or understeer) adjustment. Whiteline sway bars are manufactured using the finest grade spring steel. They are powder coated and supplied with high performance polyurethane mounting bushes in a DIY kit form, ready to simply bolt on. So without reducing comfort, a Whiteline sway bar will make your suspension system and tyres perform better, making the car more responsive while delivering more grip.

Fits Applications:

(Rear) Infiniti G37 08-On 3.7l coupe

Replacement type

3 point adjustable

(Rear) Nissan 370Z Roadster & Coupe 08-On

Replacement type

3 point adjustable

Motul MoCOOL (Radiator Additive) -- 1/2 L bottle

Motul MoCool Coolant Top concentrated engine cooling additive that works in any cooling system of bikes, cars, ATVs. Reduce engine temperature by 15�C (30�F) Outstanding thermal exchange Anti-corrosion Note: MoCooL does not provide any antifreeze protection.

Motul 8100 5w30 X-Max (1L Bottle)

Specially designed for high performance gas and diesel engines with extended drain intervals.

Anzo L.E.D. Tail Lights -- 05-08 Frontier

Anzo USA LED tail lights for your 05-08 Frontier. This is an easy upgrade for your Frontier. A true Plug N Play application.

Anzo Projector Headlights -- 05-08 Frontier

Anzo USA's Direct Plug N Play Projector headlights for your 05-08 Frontier. Change the look of your front end while improving on your night vision on the road!

Revtek 05-10 Frontier 4x4 & 4x2 Suspension Lift System

Features:

*Based on Revtek�s unique split spacer system
*Made in the USA
*Works within the OEM suspension geometry
*No cutting or welding necessary
*For use on 4x4 and 4x2 models
*Improves handling, reducing front end dive and roll
*Components made of OEM equivalent or better materials for durability and strength
*Allows for up to 285/75 tires
*Maximum recommended wheel size, 16x8 utilizing factory off-set
*Utilizes OEM shocks/struts

Bullydog -- Power Pup Gas Nissan 05-10

Vehicle Applications:

Calmini Idler Arm Brace (2000-2004 Xterra)

Our simple bolt-on idler arm brace creates a double shear mounting point for the factory idler arm spindle shaft. It eliminates the side loading force generated by big tires bouncing off of big rocks! Cheap insurance against snapping the entire assembly off and becoming stranded. Designed to be used individually as our replacement steering system utilizes and incorporated idler arm brace into the idler arm assembly. The part is laser crafted for a perfect fit. Finished in signature CALMINI blue powder coat.

SPC Rear Cam Bolts

The 72265 Rear Kit offers adjustment for the 2007 and up Infiniti G35. These cams replace the OE camber and to adjustment cams and provide additional camber (+/- 3.0 degrees) and toe (+/- 3.0 degrees) changes. Adjustment slots will need to be elongated using the 85125 rotary file set or equivalent. This is the perfect kit to adjust rear alignment angles for optimum handling and maximize tire life.

GTSPEC 2 Point Rear Lower Brace for 07+ Nissan 370Z

SPL Titanium Rear Traction Arms -- 370Z/G37

SPL pro rear traction arms eliminates bushing flex in the stock arm to reduce toe change in the rear suspension under hard acceleration/braking and when going over bumps. This provides more stability and predictability to the rear suspension for tighter handling. Our traction arms are also length adjustable to allow the rear suspension geometry to be adjusted for bumpsteer.

1.25" 4130 chromoly tubing construction for strength
QA1 3-piece 20mm chromoly rod end with teflon lining provides low friction for maximum performance

Adjustment specs
Length adjustment range is +/- 0.75 inch from stock arm

S&B Cold Air Intake Kit for 04-10 Nissan Titan/Armada

S&B Filters has been providing technological advancements for the high performance air filter market for over 30 years. See how our products can help you get the most out of your vehicles.

SPL Titanium Rear Traction Rods S13/S14/Z32

The traction rods holds the rear wheels in position relative to the chassis during acceleration and deceleration. Our traction rods allow for length adjustment (total of 1.5" of adjustment, largest range on the market) which can be used to alter rear suspension toe (bump steer) under suspension travel (should be setup by a race alignment shop). Our toe arms feature 1.25" tubing, and QA1's Endura chromoly rod ends, which are designed specifically for motorsports, featuring a teflon/kevlar injection molded liner that makes the rod end self-lubricating and self-cleaning. New for version 3, our arms also feature our new Hybrid adjuster, which allows for consistent and accurate alignments using a billet aluminum clamp that prevents the spherical bearing from rotating when locking down the alignment. Performance tip: For best performance, the traction rods can be used with solid bearing spindle bushing and reinforced subframe to minimize forward/backward movement of the rear wheel/tire under hard acceleration/deceleration. Note: Hicas must be disabled on cars equipped with Hicas. Adjustment specs: -7/8" to +5/8" from stock length

NonStop Tuning Crank and Alternator Pulley Kit for 370Z/07-08 35

The NST Nissan 370Z VQ37HR Pulley Kit increases horsepower via great weight reduction and the underdriving of accessories. Superior to other available kits, NST kits also offer an Overdrive Alternator Pulley to optimize output for stereo system lovers.

The NST Pulley kit drives the alternator at OEM speeds, no slower, no faster. As a result, there is no need to worry about dimming lights, weak batteries, or weak alternator output.

Each kit is carefully crafted from 6061-T6 aircraft aluminum, tested and balanced to high tolerances. Every NST pulley is hard anodized for exceptional durability and is available in a choice of colors: Red or Graphite Gray.

The NST Nissan 370Z VQ37HR Pulley Kit is compatible with the OEM Nissan belt.

Racing Brake Stainless Steel Brake Lines -- 09 370 Sport

Brake line kit comes with all the necessary components for a complete installation of front and rear axle.

These lines are built to RB specifications, meeting D.O.T. Certification. Stainless steel brake lines improve braking performance, eliminates the spongy feel of rubber hoses and provides superior resistance to corrosion.

***09+ 370z Sport

370Z JDM RHD Steering Column Control Switch Stalk

JDM RHD Steering Column Control Switch Stalk Designed for JDM right hand drive applications but will work on US car. Will be reversed.

Injen Dual Cold Air Intake w/MR Technology and Air Fusion for 37

Injen technology continues to lead the way, delivering 'WORLD CLASS PERFORMANCE INTAKES". Injen's patented MR step-down process and Air Fusion come together to give you the first pre-tuned, twin, cold air intakes engineered for your 370Z. The all-new SP1989P keeps raising the bar s the only "Tuned cold Air Intake System" on the market capable of producing up to 15 h/p and 11ft/lbs. of torque. "The Best of the Best" just got better with the release of the Injen/Amsoil Ea nano-fiber preformance dry filters. NO OIL REQUIRED. No more contaminated sensors! Buy from the company that invented and patented teh MR step-down process, buy Injen Technology.

N-Fab Light Bar -- 04-10 Nissan Titan

Features

-Fichter Designs licensed to N-FAB, Inc. are Protected U.S. Patent Law and International Copy Right Law. U.S. Patent # 6588783, # 6874801 and # 7416202 other patents and continuances pending. (see policies section of site for more information).
-Made In The USA!
-Life Time Warranty on Product & 5 Year Warranty on Finish
-Utilize Factory Front Bumper
-Welded All 1 Piece Construction For Strength & Longevity (Non Modular)
-Mount Up To Four 9 Inch Lights
-.095 Wall Tubing With Black Powder Coat Finish (Custom Color Available For An Additional Charge)
-Light Bar

Anzo 2004 - 2007 Nissan Titan/Armada Projector with HALO (CCFL)

It's time to upgrade your headlights! Anzo USA's Projector Headlights with Halo and the perfect compliment to your Nissan Titan/Armada.

Stillen Grounding Kit Titan, Armada, QX56

You are losing horsepower and torque without STILLEN's new Grounding Kits. Today's engine management systems utilize hundreds of sensors and in some cases over 12 onboard computers that constantly monitor all parameters of the engine and powertrain. Installing STILLEN's Grounding Kit ensures that sensors and computers are not affected by power surges that can drain performance. This ensures that all wire diameters are optimal for amperage and current travel distance. These kits feature 8-gauge copper wire, gold plated connectors along with 4-gauge & 8-gauge ring connectors, and are developed specifically for your application. Available in silver or red. These grounding kits will also improve the shifting on automatic transmission vehicles, and in most cases noticeably improve shift times and reduce lag.

Fits Nissan Titan , Nissan Armada, Infiniti QX56

N-Fab Rear-Runners 04-10 Nissan Titan

Features

-Rear-Runner
-.095 Wall Tubing With Black Powder Coat Finish (Custom Color Available For An Additional Charge)
-Mount Up To Two 7 Inch Lights
-Welded All 1 Piece Construction For Strength & Longevity (Non Modular)
-Utilize Factory Rear Bumper
-Bolts Directly To Factory Rear Bumper
-Life Time Warranty on Product & 5 Year Warranty on Finish
-Made In The USA!
-Fichter Designs licensed to N-FAB, Inc. are Protected U.S. Patent Law and International Copy Right Law. U.S. Patent # 6588783, # 6874801 and # 7416202 other patents and continuances pending. (see policies section of site for more information).

N-Fab Pre-Runner 04-10 Titan/Armada

Features

-Fichter Designs licensed to N-FAB, Inc. are Protected U.S. Patent Law and International Copy Right Law. U.S. Patent # 6588783, # 6874801 and # 7416202 other patents and continuances pending. (see policies section of site for more information).
-Made In The USA!
-Life Time Warranty on Product & 5 Year Warranty on Finish
-Utilize Factory Front Bumper
-Welded All 1 Piece Construction For Strength & Longevity (Non Modular)
-Mount Up To Three 9 Inch Lights
-.095 Wall Tubing With Black Powder Coat Finish (Custom Color Available For An Additional Charge)
-Pre-Runner

K&N Drop in Air Filters

K&N�s replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. We make over 1,200 different replacement air filters for virtually every vehicle on the road. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. See applicable instruction sheet for details. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty� and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.

Stillen Generation 2 Long Tube Dual Intake Kit 07-08 350z

For those 2007-2008 350Z, 370Z, G35 Sedan and G37 Coupe owners who want improved performance with a show quality shine, we�ve introduced our Gen 2 Long Tube Intakes. We replace the restrictive factory air boxes with two (2) dual cone genuine K&N reusable high flow conical air filters. These filters are designed with an integral velocity stack and attach to our newly designed polished aluminum long tubes. Replacing the factory intake tubes with the STILLEN design adds additional horsepower, and a great look for the engine bay.

SPL Pro Front Outer Tie Rod Ends Z33

Our SPL pro outer tie rod ends is used eliminate bump steer for best handling: Adjustable bump steer geometry -- position of tie rod end pivot point is 5-way adjustable from -1/2" to +1/2". CNC machined 4130 chromoly shank that is heat treated and cadmium plated for maximum strength. CNC machined 2024 aircraft aluminum alloy (also known as Super Duralumin) bumpsteer adjustment spacers. CNC machined 2024 aircraft aluminum alloy buckle. QA1 teflon-lined chromoly high-misalignment rod end, this special rod end offers an incredible 65deg of articulation angle. This is more than stock (~50deg) and much more than other aftermarket tie rod ends (~35deg). Massive 5/8" size for maximum strength. Our outer tie rod ends are designed to take the high steering forces created from hitting steering lock in drifting. Tested and used by Chris Forsberg on his Formula-D 350Z! Note: When used with stock inner tie rods, an additional 5mm wheel spacer may be required for clearance if your wheel is offset very close to the upright. When used with Tein inner tie rods in conjunction with increased steering angle spacer, no additional wheel spacer is required.

Whiteline Rear Swaybar 20mm Heavy Duty Blade Adjustable 350z

Whiteline's Anti-Sway Bar kits are engineered to optimize the suspension on your vehicle. When one side of your vehicle's suspension compresses, or pushes down on the springs, the anti-sway bar is pulled up. The resulting twist in the bar forces the other end to pull down. This force will lift the compressed corner of the vehicle and pull down on the unloaded wheel on the other side. The result: your vehicle will lean less and handle better and more predictably! You'll have better control when maneuvering through lane changes and tight turns! Each bar is manufactured from high carbon steel, hardened, and stress-relieved. Mid and end link bushings are all urethane. Includes lifetime limited warranty! Includes Urethane Bushings! Gives Your Vehicle Flat, Tight Cornering! Balances Out Understeer! Provides Dramatic Handling Improvement! Manufactured Under ISO9002 Regulations!

Whiteline Front Swaybar 32mm Heavy Duty Blade Adjustable for 350

JDM Smoked Front Side Markers 350Z -- EACH SOLD SEPARATELY

03-06 350z JDM Nismo Kick Plate Set

NISMO JDM aluminum kick plates

Racing Brake ET700 Pads Front 350Z / G35 Brembo

AGGRESSIVE STREET: ET700 - This compound is offered for the adventurous drivers who: - Do not like loud squeaking - Do not like a lot of dust - Do like extended rotor lifeBeing these pads are streetable therefore they are not intended for intensive and continuous hard braking over the temperature and speed limit on the race track, otherwise excessive wear may occur.

Fits all 350Z and G35 with OEM Brembo Brakes

Goodridge Stainless Steel Brake Lines 350Z (Front and Rear) Tour

One of the best known names in the stainless steel brake line industry, Goodridge brake lines are designed to DOT certification and TUV approval and undergo a 9-point quality inspection and testing to 3000psi prior to release. They feature all the necessary fittings and brackets for a direct, bolt-on installation and are backed by Goodridge's 'Forever Guarantee'.

S14 Euro Kouki Headlights -- 97+

Upgrade your stock yellowed plastic headlights with these glass Euro headlights.

Sold Separately.

Eibach Pro Kit, High Performance Springs -- 1.2

Eibach Lowering Springs

Nissan Motorsports S14 Hard Rubber Steering Rack Bushing LH

The Nismo reinforced steering mount bushes improve driving feel by removing flex of the steering rack where attached to the vehicle body. Hardened mounting bush for attaching the steering to the body, providing better steering response and more direct feel. Compared to standard steering, more bumps and unevenness will be felt through the steering wheel. Steering may also feel slightly heavier than standard Designed as simple bolt-on type part for each vehicle

S13 Silvia Grille

Genuine Nissan S13 Silvia grill from Japan. Clear 'Silvia' grill for S13 Silvia front end.

NOTE:THIS PART IS ON BACK ORDER IN JAPAN. ON AVERAGE, IT WILL TAKE 6-8 WEEKS FOR ARRIVAL UPON ORDER.

SPL Pro v5 Front Outer Tie Rod Ends (S13/S14)

On cars that are lowered significantly, the stock outer tie rod ends can bind and snap or bend the tie rods. Our outer tie rod ends have more articulation angle than stock tie rod ends, and have adjustable spacers to move the outer tie rod end lower to eliminate binding. When combined with our SPL pro front lower arms, our outer tie rod ends can also be adjusted to correct bump steer that results from lowering and modified front lower arm geometry. We have been improving the strength of our tie rod ends since we first released this product over 2 years ago, to take the abuse of drifting as sudden steering lock places alot of stress on the outer tie rod ends. With each improvement, customers have been given free updates to their outer tie rod ends, as our commitment to offering the highest quality and safest suspension products. Features that distinguish our outer tie rod ends from our competitors: Our unique design allows for easy bumpsteer adjustment in 0.3" increments, allowing for up to a +1" shift of the pivot point from the stock location. This offers much greater adjustment range than any other aftermarket outer tie rod ends. The bumpsteer spacers are integral to the design and reinforce the shank under bending loads. Spacers are CNC machined from 2024 aircraft aluminum alloy (also known as Super Duralumin), a much stronger (and much more expensive) aluminum than the more common 6061, this expensive alloy is lightweight yet has almost the same strength as steel. Our shanks are CNC machined from alloy steel, then hardened (by heat treatment) to maximize strength. We use QA1's 5/8" teflon-lined chromoly high-misalignment rod end, this special rod end offers an incredible 65deg of articulation angle. This is more than stock (~50deg) and much more than other aftermarket tie rod ends (~35deg). Our outer tie rod ends are designed to be used with either 90-96 300ZX (Z32) or 03+ 350Z (Z33) inner tie rods on the 240SX. The Z32 or Z33 inner tie rods are much stronger than the stock 240SX tie rods, are relatively cheap and easily sourced, and provide for a much larger range of toe adjustment than the stock 240SX inner/outer tie rod setup. New for v4, to reduce unsprung weight, we now also make our buckles from the expensive but very strong 2024 aircraft aluminum alloy (Super Duralumin) instead of steel. New for Version 5! Our shanks are now made from 9310 alloy steel. 9310 is an alloy noted for its incredible impact and fatigue strength, and for that reason is most commonly used in performance transmission gears! We use this alloy to take the abuse and shock loads from lock to lock steering in drifting. Our hardened 9310 shanks are certified for 190,000psi tensile strength. Application notes: On a 240SX with stock knuckles, our outer tie rod ends should only be used with 300ZX (Z32) or 350Z/G35 inner tie rods; it cannot be used with standard 240SX (S13 or S14) inner tie rods. On a 240SX with certain modified knuckles (eg. MA Motorsports knuckle), you may need to use S14 inner tie rods with our outer tie rod ends, please verify with the maker of the knuckle for details.

Nissan Motorsports Aluminum Flywheel for all SR20DET Equipped Ve

Hard Rubber Steering Rack Bushing -- RH

Nismo Braided Steel Clutch Hose

Nismo introduce the Braided Stanless mesh Clutch hose. Suitable for Nissan 180SX, Silvia, Skyline, GTR, Z33 and the Skyline 350GT.