16444 S. Highland Ave Fontana, CA 92336
  • An empty cart

    You have no item in your shopping cart

Product Details


Stillen Cross Drilled and Slotted 1-Piece Rotors (w/o Akebono)


INF3000XS/INF3101XS In stock 30 lbs , , , , , , , , , , , , , , , ,


Cross drilled and slotted rotors combine the best features of a slotted rotor and a cross drilled rotor. Fewer holes mean longer brake pad life with no penalty in the way of initial brake pad bite. The improved bite and cooling from the cross drilled pattern along with the ventilation and pad out gassing offered by the slots means you are getting the best of both worlds.

When you look through the wheel of a vehicle and you see the aggressive cross drilled slotted pattern, you know that driver is serious about performance! STILLEN’s cross drilled and slotted rotors are engineered to bolt directly to your factory braking system and will not require any modifications. The average driver will not notice any excess wear or decrease in durability over a cross drilled or slotted rotor.

Features of STILLEN Cross Drilled & Slotted Rotors:

Combines the features of Cross Drilling and Slotting for the best of both worlds.
Fewer holes mean longer pad life with little penalty in the way of initial pad bite.
Additional leading edges allow the brake pad to improve grip.
Under hard use, the cross drilled holes can provide better cooling.
Holes are radius-chamfered with special tooling, minimizing stress-raisers for maximum resistance to heat and longer rotor life compared to lower-priced cross drilled and slotted rotor offerings.
CAD tools are used to optimize the face patter for full pad sweep, reducing hot spots and grooving.
Arrive finished, machine-balanced and ready to install!
If you are into high performance driving or go to the track to push your vehicles limits, then a cross drilled and slotted rotor is for you. If you live in a mountainous environment where excessive hard braking is the norm, a cross drilled and slotted rotor is for you as well. The everyday driver who is serious about the styling of their vehicle and enjoy maximum braking ability will be more than satisfied with a cross drilled and slotted rotor.

This Part Fits
2008-2012 Infiniti EX35
2003-2005 Infiniti FX35
2003-2005 Infiniti FX45
2011-2012 Infiniti G25
2005-2006 Infiniti G35 – RWD
2007-2008 Infiniti G35 – AWD
2007 Infiniti G35 – Base – Sedan – RWD
2007 Infiniti G35 – Journey – Sedan – RWD
2007 Infiniti G35 – Coupe – RWD
2008 Infiniti G35 – Base – RWD
2008 Infiniti G35 – Journey – RWD
2009 Infiniti G37 – X – AWD
2009 Infiniti G37 – Base – Sedan
2009 Infiniti G37 – Journey – Sedan
2010 Infiniti G37 – X
2010-2013 Infiniti G37 – Base – Sedan – RWD
2010-2013 Infiniti G37 – Journey – Sedan – RWD
2006-2010 Infiniti M35
2011-2013 Infiniti M37
2006-2008 Nissan 350Z – Base
2006-2009 Nissan 350Z – Enthusiast
2006-2009 Nissan 350Z – Touring
2009-2014 Nissan 370Z
2005-2006 Nissan Altima – SE-R
2004-2014 Nissan Maxima
2003-2014 Nissan Murano

Additional information

Weight 30 lbs
Dimensions 16 × 16 × 4 in

Front, Rear


There are no reviews yet.

Be the first to review “Stillen Cross Drilled and Slotted 1-Piece Rotors (w/o Akebono)”